CLICK ANY IMAGE TO ENLARGE
Supplied as standard with a CB2 (17" Cast Iron Arch Back)
Overall Sizes: 940mm (wide) x 940mm (high)
Cast Iron - All the cast iron products are delivered with a protective, oil-based coating on polished surfaces. This should be cleaned off after installation and it is recommended that a spray-type oil is applied to these areas on a regular basis to avoid surface rust forming. Under no circumstance should a water-based cleaner or polish be used to clean cast iron products. Polished surfaces will undergo thermal discolouration during normal use and this is to be expected. High temperature black paint is used inside the fire chamber and will burn off over a period of time. High temperature touch up paint is available from your retailer if required. Ash build up beneath the fire will cause the grate to burn out more quickly. The grate and back brick (if present), are consumable parts of your fire and will need replacing from time to time. Due to the nature of cast iron it is vital that all fireplaces undergo a period of 'burning-in'. This involves lighting small fires initially, gradually increasing in size with each subsequent firing.
FDC Code: CVICTORIAH
Shown with:
54" Victorian Classic mantel in Aegean Limestone and a bespoke coal effect gas fire.
William IV mantel in Aegean Limestone and a bespoke coal effect gas fire.
Line drawing.
54" Victorian Classic manel in Aegean Limestone, bespoke coal effect gas fire and polished black granite hearth.
60" William IV mantel in Aegean Limestone, bespoke coal effect gas fire and honed black granite hearth.